AFL MOTORS EUROPE introduces the new B3P190 series of compact fans. They use a high-performance EC motor based on the technology of homogeneous plate magnets, thanks to which the fan has a high operating culture and generates low noise even at low rotational speed. The new motor design also increased its efficiency by as much as 21% compared to the current available model.
The fan is designed for use in devices with limited space, and its installation is suitable for compact device chambers.
Basic technical data:
- 2 EC motors with a maximum power of 87 and 183 W
- low power consumption: 3 – 183 W;
- efficiency: 50 – 970 m3/h;
- operating temperature: -25 – 60°C;
- degree of protection: IP54;
- control: 0 – 10 V DC/PWM;
Special features:
- Compact size enabling easy installation
The height of the fan is only 85 mm. - Energy-saving EC motor with high efficiency of up to 46%
A new generation electronically commutated motor with homogeneous plate magnet technology is needed for higher efficiency and lower noise. - High-class ball bearings with NMB double-sided sealing ensure long-term and reliable operation up to 40 000h.
- The fan meets strict EMC requirements – confirmed by tests in the European Laboratory. Test results are available for inspection – please contact the Polish office directly.
- Plastic impeller with optimized blade shape and motor design ensuring efficient operation and low noise emission.
- The integrated plastic mounting console with double inlet ring increases the fan’s operational culture, even when the fan is mounted in “tight” device chambers. The console improves the airflow balance, minimizes turbulence, and reduces noise during fan operation.
The main mounting plate is slightly larger than the fan’s overall dimensions, which allows for easy installation of the fan in the device from both the suction and discharge sides.
7. Ready-made holes for mounting pressure connectors
The base of the mounting plate has prepared holes for mounting pressure connectors. This significantly speeds up assembly and measurement precision, as the nozzles will always be mounted in the same place.
Pressure measuring connectors are an accessory that can also be ordered from our office, receiving a complete set ready for installation in your device.
Here you can see a short presentation:
8. Application: heat recovery units, ventilation units, roof fans, air purifiers
